XPS 16K

FOUR CHANNELS DSP AMPLIFIER

XPS 16K provides extreme power density with 4 x 4000 W continuous power output in 2 RU space for both touring and installed sound systems. The unit features four analog and digital AES/EBU inputs/outputs, a Dante Network Connection (XPS 16KD), and complete signal processing, tuning, and routing capability all at 96 kHz. Redundancy and full scalability are granted by the advanced and modular design of the circuitry. A complete set of TT+ AUDIO loudspeaker presets is available, with powerful signal processing for complete system tuning.

16000 W

4 x 4000 W Class D continuous power

40-bit

Floating-point Processing, up to 96 kHz

Dante Audio Network

Available on XPS 16KD

RDNet

Networked Management

Full On-board

Processing with Delay, EQ, Comp/Limiter

Touch 4.3"

Color TFT Interface
DOWNLOAD SPECSHEETS

Amplifier specifications

Amplifier Class:
D
Output power
(EIAJ 8:32 all channels driven):
4 x 4000 W @ 2.7 ohm
4 x 2600 W @ 4 ohm
4 x 1400 W @ 8 ohm
Frequency Response (-3dB):
20 Hz - 23000 Hz
SNR Analog inputs (unweighted):
>111 dB
SNR Digital inputs (unweighted):
>115 dB
Crosstalk:
<70 dB
THD+N (20 Hz ÷ 20000 Hz,1000 W @ 4 ohm):
<0.2 %
Gain (linear mode @ 0 dB):
32 dB
Damping factor (@ 4 ohm, 20 Hz - 1500 Hz):
>95
Max burst length
(@ 50 Hz, CF = 7 dB, 4 ohm, 1% THD+N):
200 ms

Output section

Signal output number:
4
Signal output connectors:
XLR
Power output connectors:
Speakon
General Purpose Outputs (GPO):
3
Programmable GPO:
Yes

Configuration and control

Configuration:
Front panel touch screen, PC Software
Network:
Gigabit ethernet
RCF speakers presets:
Yes
Priority:
Yes
Protocols for system integration:
Proprietary OSC based protocol, Q-SYS
RDNet:
Yes

Operating conditions

Temperature range
Continuous operation:
-5°C to +40°C / +23°F to +104°F
Temperature range
Reduced output power:
-5°C to +50°C / +23°F to +122°F
Fan noise idle:
<35 dBA
Fan noise max:
<64 dBA

Standard compliance

Safety agency:
CE compliant

Size

Height:
88.7 mm / 3.49 inches
Width:
482 mm / 18.98 inches
Depth:
482.4 mm / 18.99 inches
Weight:
15 kg / 33.07 lbs

Input section

Total number of inputs:
8 (XPS 16K)
16 (XPS 16KD)
Line inputs:
4
Line connectors:
XLR
Digital inputs:
4 (XPS 16K)
12 (XPS 16KD)
Digital connectors:
XLR (XPS 16K)
Ethercon, XLR (XPS 16KD)
Digital type:
AES/EBU (XPS 16K)
AES/EBU. DANTE (XPS 16KD)
General Purpose Inputs (GPI):
2
Programmable GPI:
Yes
Photo-coupled GPI:
2

Processing

DSP:
2 SHARC, 40-bit floating point, 96 kHz
2 ADAU, 32-bit fixed point, 96 kHz
EQ Filters:
Peaking | HI/LO-shelving | HI/LO-pass
(Butterworth, Linkwitz-Riley, Bessel)
Advanced algorithms:
FiRPHASE technology

BASS shaper
air compensation
mid-low correction
driver excursion control
dynamic PEQ
multiband compressor
pilot tone detection
backup recovery strategy
impedance load measurement

Compressors:
RMS limiter dynamic compressor power limiter thermal compressor
Delay:
0 - 4000 ms (each channel)
Tone controls:
Yes
High-pass filter:
10 Hz - 1000 Hz
Crossover:
2500 - 3500 Hz
Automatic Gain Control (ACG):
Yes

Protections

Cooling:
Forced
Short circuit:
Yes
Thermal:
Yes
DC:
Yes
Fuses:
Yes
VHF (Very High Frequencies):
Yes

Power requirement

Operating voltage:
90-240 V~ 50/60Hz
Nominal current AC @ 100-120 V:
30 A
Nominal current AC @ 220-240 V:
16 A
Stand by power consumption:
20 W
Idle power consumption:
90 W
Power consumption:
5800 W
Main fuse:
Internal
Fuses Model:
F 315 mA H 100 V (XPS 16KD only)

Physical specifications

Cabinet/Case Material:
Metal
Handles:
2 metal handles for rack mount
Color:
Black - RAL 9005
Rack mounting:
19", 2U